Liteye HMs Microdisplay & thermal cameras
LE 750A Rugged & See-Through OLED Microdisplay
The LE750A is a high performance rugged “See-Through” microdisplay optimized for applications requiring a high degree of situational awareness. Utilising the same AMOLED as the LE600-541 the transparent optic provides the user with the ability to overlay his/her information, or video, over their view of the real world.
Available in full colour SVGA (800x600), VGA (640 x 480) or monochrome video (RS170/CCIR) the LE750A provides a low distortion and colour corrected display that can be used with a wide variety of computing and video sources.

Designed for portable applications the LE750A weighs less than 100g and consumes less than 400mW when operational. Capable of withstanding temperature extremes from -40°C to +65°C, survive immersion in water depths of 1m for up to ten minutes and remain fully functional after a 1m drop on to concrete the LE750A is suitable for use in harsh environments. The LE750A is fitted with a standard 15pin VGA connector (for data) or a BNC connector for video, with the option of MIL-Spec connectors if required.

LE 750A Rugged and See-Through OLED
LE 750A Rugged and See-Through OLED

LE-600 OLED Microdisplay
The LE-600 is Liteye’s standard military grade monocular, helmet mountable, microdisplay. Fitted with a full-colour AMOLED display the LE600 is capable of displaying computer data in standard SVGA (800x600) and VGA (640 x 480) formats or accepting analogue video streams conforming to the RS-170/CCIR (monochrome) standard.
This lightweight unit weighs less 160g, and when fully powered from a nominal 5VDC source consumes less than 400mW. Three buttons located on the bottom of the unit control brightness, contrast, mode and 'soft-off', although, through customized firmware, these can be programmed for alternative functions.

The standard LE-600 can be supplied with a cable with a standard 15pin VGA connector for connection to SVGA/VGA sources and a cable with a BNC connector for connection to RS-170/CCIR sources.

The housing is made from hard coated aluminium and fitted with electrically conductive gaskets to ensure superior EMC/EMI performance. Manufactured and tested to MIL-STD-810F and capable of withstanding temperature extremes from-40°C to +65°C, surviving immersion in water depths of 1m for upto 10 minutes and remain fully functional after a 1m drop onto concrete.

Connections are via a single military connector (typ: SCE-B-76A07-14SN-001). For covert applications the LE600-541 is available with an optional covert eyecup that prevents light escaping from the display when the unit is powered, hence eliminating back-reflection.

The NSN number for this device (excluding covert eye-cup) is 5980-01-568-4130



LE-600 Rugged HMD
LE-600 Rugged HMD

LE-720A

The LE-720A features our patented six element prismatic optic. It is rugged and lightweight and easy on the eye. Designed to be worn on goggles, its position and size allow the user to maintain their peripheral vision.

It can be positioned above or below the eye, left or right eye mounted; can be used in situ with NVGs (filter required) and is, at present, integrated on the Oakley Ballistic goggle.

LE720A Spec Sheet.pdf

LE-450 Smallest Display
Liteye-450 Smallest Display
The Liteye-450 is the smallest in the Liteye family of HMDs, weighing in at less than 99.5g. This new very Rugged Monocular Display is ideal for all near-eye applications.
    Main Features:
  • 852 (x 3) x 600 pixel OLED microdisplay
  • No extra control box,all electronics in the pod
  • VESA compatible analog RGB inputs
  • Rugged and water proofed. Eye cup available
  • 16:9 and 4:3 image aspect ratio
  • 15.6 mm (0.61") image diagonal
  • > 100 cd/m2 front luminance
  • Power consumption : Less than 200 mW nominal modes
  • -40°C to +85°C operating temperature

Various mounting options
  • Flight helmets/combat helmets
  • fire helmets/Fire mask
  • Chemical mask
  • headsets

Applications:
  • Covert video display
  • Hands free display for visual aids
  • Mask mounted display
LE450spec.pdf

Liteye Lima Mouse
The LIMA pointing device (mouse) creates a unique interface for the LE600-541/VTH family of microdisplays. Weighing less than 75g this ruggedised unit is capable of providing all the functionality of a Microsoft HID compliant mouse.
It is compatible with many operating systems including Windows®XP® and Vista® Lima is the perfect compliment to the LE-600 family of microdisplays providing convenient, covert control of any body worn pc equipment.

Built to the same high standards of the LE600-541 the unit is sealed to IP67, will survive submersion in 1 meter of water for 10 minutes and withstand a 1meter drop onto concrete with an operating temperature range of -20°C to +65°C, making it the ideal “mouse” for use in harsh environments. Suitable for both left-handed and right-handed operation the cursor control features a resolution of 96 dpi and in industry standard USB 2.0 interface.

Lima Mouse
Lima Mouse

  Contact us    

  Roma Uffici
  +39-06 86 89 42 59
Switch in English
 QuickSearch: 
    http://security.bfioptilas.it/
    >HMD's Microdisplays